SANMU HOT INK ROLLS TROUBLESHOOTING
一.Potential cause:ink roll life too shortProblem
   *Problem :1.Temperature too low.2.Ink roll and type not properly preheated.3.Incorrect ink roll series for your application
   *Solution :1.Increase ink roll temp within the proper specified temperature range.2.Preheat ink roll and type for 15 minutes prior to operation. 3.Choose a longer life ink roll series.
二.Problem:Grooved ink rolls
   *Potential cause:Ink roll and/or type not properly preheated.
   *Solution : Preheat ink roll and type for 15 minutes prior to operation.
三.Problem:Ihk smearing
  *Potentialcause:cause:1.Dirtytype.2.Inktemperature  toohigh.3.Incorrect ink roll series for your application
   *Solution :1.Thoroughly clean type with appropriate SANMU cleaner. 2.Decrease ink roll temperature within specified temperature range.3.Choose a different SANMU ink roll serise.
四.Problem:Ink build up on type
   *Potential cause:Yemperature too high
   *Solution :Clean type with the appropriate SANMU cleaner.decrease ink roll temperature with the specified Temperature range
SANMU墨轮疑难解答
一.问        题:墨辊寿命太短
    *潜在原因:1.加热温度太低.2.没有按墨轮类型规定的温度进行正确预热.3.使用的墨轮型号不合适你的需要.
    *解决方案:1.升高墨轮温度到指定的温度范围.2.根据墨轮的类型，应提前15分钟进行预热。 3.选择长寿命的墨轮系列。

二.问        题:墨轮表面出现沟槽.
   *潜在原因:没有根据墨辊的类型进行正确预热。
   *解决方案:根据预热墨辊的类型，提前15分钟运行预热。
三.问        题:油墨字迹容易擦糊.
   *潜在原因:1.使用了油墨字迹容易擦糊的墨轮类型2.墨轮使用温度过高3.使用的墨轮型号不合适你的需要.
   *解决方案:1.选择不易擦糊的墨轮类型或适当SANMUM墨轮。 2.降低墨轮温度到指定的温度范围内.3.更换一SANMU墨轮类型。
四.问        题:油墨字迹增大.
   *潜在原因:温度太高.
   *解决方案:选择不易擦糊的墨轮类型.降低墨轮温度至指定的温度范围内.
                                    中国墨轮网China hot ink rolls

                                   http://sanmumolun.zhan.cn.yahoo.com

                                                           http;//sanmumolun.zhan.cn.yahoo.com